Boards antiqued by hand, replicate the precious irregularities of aged wood.
All the charm of yesteryear, with a contemporary style. Painstaking manual processes and in-depth knowledge of the raw material allow us to recreate the beautifully uneven, aged look generally found only in antique wood. The extraordinarily fine craftsmanship that goes into these European Walnut, American Walnut and Oak floors make them the perfect complement to a wide range of different interior design solutions, from country villas to loft apartments in the city, characterised by rustic warmth or minimalist rigour. Antique is much more than an aged floor: this pre-finished three-layer solution, with a 5.5 mm top layer, is a masterpiece of fine Italian craftsmanship, available in both herringbone and straight board options, in a wide range of finishes.
Antique Ca Zorzi
Antique Ca Zorzi
Antique Ca' Zorzi
OAK, SMOKED, BRUSHED, STAINED, AGED EFFECT, HAND CARVED, OILED.
TECHNICAL DATA
OAK BOARD/FIR BACK SUPPORT /3 LAYERS/PREFINISHED 17 MM (11/16”) or 20 MM (3/4”)/TOP LAYER 5,5 MM
TOP LAYER
ANTIQUE STYLE SINGLE-PLANK NOBLE LAYER IN SOLID WOOD THICKNESS 5,5 MM +/- 5%
BACK SUPPORT
SPECIAL 2 LAYERS FIR PANEL MANUFACTURED BY LATIFOGLIA (FOGLIE D’ORO)
WORKING - FINISHES
BRUSHING, HAND-PLANNING, SAW CUTTING, AGING EFFECT. FINISHED WITH VARNISH, OIL OR WAX
THICKNESS
17MM (11/16”) or 20MM (3/4”)
WIDTHS & LENGTH
MEDIUM:
4.75” OR 5.5” - VARIABLE LENGTHS : 31.50”<87.00”
MIX 4.75”/ 7” / 9.5” - VARIABLE LENGTHS : 40.00”<107.0”
LARGE:
7” OR 8” - VARIABLE LENGTHS : 40.00”<100.00”
XLARGE:
9.5” - VARIABLE LENGTHS : 40.00”<107.00”
MIX 8”/ 9.5” / 12” - VARIABLE LENGTHS : 40.00”<107.0”
MAXI (JUMBO) - ONLY NATURE QUALITY
9.5”, 12” OR 13.75” - VARIABLE LENGTHS : 100.00”<178.00”
MIX 9,5”/ 12”/ 13.75” - VARIABLE LENGTHS : 100.00”<178.00”
ULTRA (JUMBO) - ONLY NATURE QUALITY
15.8”, 17.8” OR 20” - VARIABLE LENGTHS : 100.00”<178.00”
MIX 15.8”/ 17.8”/ 20” - VARIABLE LENGTHS : 100.00”<178.00”
QUALITY: RUSTIC / NATURE / SELECT
CERTIFICATION
MADE IN ITALY CE
APPLICABLE CODES
UNI EN 14342 :2005+A1:2008
LAYING
FLOATING OR GLUED
PROFILING AND CONNECTION
TONGUE & GROOVE 4 SIDES + BEVEL
INSTALLATION ON UNDERFLOOR HEATING SYSTEM
SUITABLE (AVOID SURFACE TEMPERATURE ABOVE 28° C. REFER TO EXTENDED LAYING AND MAINTENANCE INSTRUCTIONS)
CLEANING AND MAINTENANCE
CLEAN WITH VACUUM CLEANER OR DAMP CLOTH WELL WRUNG. AVOID CLEANING WITH ALCOHOL, SOLVENTS, AMMONIA BASED PRODUCTS
USE AND MAINTENANCE INSTRUCTIONS
THE FLOORING MUST BE STOCKED IN DRY ENVIRONMENTS. LAYING MUST BE CARRIED OUT AFTER INSTALLATION OF EXTERNAL DOORS AND WINDOWS AND ONCE THE PLASTERING IS FULLY DRY, ALL OTHER FLOORING AND WALL TILES MUST BE ALREADY INSTALLED. ENVIRONMENTAL CONDITIONS: TEMPERATURE BETWEEN 15 AND 25°C AND HUMIDITY BETWEEN 45% AND 60%. RESIDUAL HUMIDITY OF THE SUBFLOOR (CONCRETE SCREED) MUST BE ≤2 %. IN CASE OF SUBFLOORING HEATING SYSTEM INSTALLATION MUST BE CARRIED OUT AND ONLY AFTER ITS TESTING. SUBFLOORING CONDITIONS MUST BE PREVIOUSLY VERIFIED (LEVELING, CONSISTENCY, ETC.) EXCESSES OF GLUE MUST BE IMMEDIATELY REMOVED BY MEANS OF SPECIFIC CLEANING PRODUCTS. AVOID COVERING THE FLOOR WITH RUGS OR FURNITURE UNTIL FLOORING EVENING OUT. IN CASE OF ACCIDENTAL WATER OR LIQUID SPILL MOP AS SOON AS POSSIBLE.
Made in Italy