Extraordinary boards for quality and size that reach a lenght of 450 cm and a width of 50 cm.
Jumbo Floor is the maximum expression of Foglie d’Oro’s talent for creating floors of unique quality and dimensions. This highly exclusive solution is guaranteed thanks to the complete control exercised over the production chain: the painstaking selection of trees at least 100 years old, from responsibly managed forests, allows us to create boards that can be as long as 450 cm(180”) and as wide as 50 cm (20”). Available in Oak, European Walnut or American Walnut, each floor in the Jumbo Floor line is a work of art able to embody an ancient history that requires no words to make a statement.
Jumbo Floor (Copy) (Copy) (Copy)
Jumbo Floor (Copy) (Copy) (Copy)
Jumbo Floor
AN EXTREMELY UNIQUE SOLUTION, THE RESULT OF TOTAL CONTROL OVER THE SUPPLY CHAIN FOR WHICH OUR COMPANY IS UNIQUE IN THE WORLD. RESEARCH AND CAREFUL SELECTION OF ONLY CENTENARY TREES GIVE LIFE TO THE SIZE OF BOARDS OUT OF THE ORDINARY - A WIDTH OF UP TO 50 CM - THAT PRESERVE THE UNIQUE QUALITY THAT DISTINGUISHES THE SURFACES OF FOGLIE D’ORO. AVAILABLE IN EUROPEAN AND AMERICAN OAK AND WALNUT, EACH FLOORING OF THE JUMBO FLOOR LINE IS A WORK OF ART THAT HOUSES AN ANCIENT HISTORY, WHICH DOES NOT NEED WORDS TO BE TOLD. JUMBO FLOOR IS AN EXCLUSIVE PRODUCT, WHICH CAN BE REALIZED THANKS TO THE THIRTY YEARS EXPERIENCE BOASTED BY FOGLIE D’ORO IN THE PURCHASE OF HIGH QUALITY LOGS FROM EUROPE AND THE UNITED STATES, THE IMPOSING "JUMBO LOGS". AN AMAZING PRODUCT, A VERY VALUABLE WOOD SURFACE, FOR COMPLETELY CUSTOMIZED SOLUTIONS IN WHICH EACH PLANK IS A MASTERPIECE.
TECHNICAL DATA
AMERICA WALNUT, EUROPEAN WALNUT OR OAK BOARD/FIR BACK SUPPORT /3 LAYERS/PREFINISHED 21 MM (13/16”)/TOP LAYER 4,5 MM (5,5 MM ON ANTIQUE STYLE)
TOP LAYER
SINGLE-PLANK NOBLE LAYER IN SOLID WOOD THICKNESS 4,5 MM +/- 5%
ANTIQUE STYLE SINGLE-PLANK NOBLE LAYER IN SOLID WOOD THICKNESS 5,5 MM +/- 5%
BACK SUPPORT
SPECIAL 2 LAYERS FIR PANEL MANUFACTURED BY LATIFOGLIA (FOGLIE D’ORO)
WORKING - FINISHES
BRUSHING, HAND-PLANNING, SAW CUTTING, AGING EFFECT. FINISHED WITH VARNISH, OIL OR WAX
THICKNESS
21 MM (13/16”)
WIDTHS & LENGTH
MAXI (JUMBO) - ONLY NATURE QUALITY
9.5”, 12” OR 13.75” - VARIABLE LENGTHS : 100.00”<178.00”
MIX 9,5”/ 12”/ 13.75” - VARIABLE LENGTHS : 100.00”<178.00”
ULTRA (JUMBO) - ONLY NATURE QUALITY
15.8”, 17.8” OR 20” - VARIABLE LENGTHS : 100.00”<178.00”
MIX 15.8”/ 17.8”/ 20” - VARIABLE LENGTHS : 100.00”<178.00”
QUALITY: NATURE
CERTIFICATION
MADE IN ITALY CE
APPLICABLE CODES
UNI EN 14342 :2005+A1:2008
LAYING
FLOATING OR GLUED
PROFILING AND CONNECTION
TONGUE & GROOVE 4 SIDES + BEVEL
INSTALLATION ON UNDERFLOOR HEATING SYSTEM
SUITABLE (AVOID SURFACE TEMPERATURE ABOVE 28° C. REFER TO EXTENDED LAYING AND MAINTENANCE INSTRUCTIONS)
CLEANING AND MAINTENANCE
CLEAN WITH VACUUM CLEANER OR DAMP CLOTH WELL WRUNG. AVOID CLEANING WITH ALCOHOL, SOLVENTS, AMMONIA BASED PRODUCTS
USE AND MAINTENANCE INSTRUCTIONS
THE FLOORING MUST BE STOCKED IN DRY ENVIRONMENTS. LAYING MUST BE CARRIED OUT AFTER INSTALLATION OF EXTERNAL DOORS AND WINDOWS AND ONCE THE PLASTERING IS FULLY DRY, ALL OTHER FLOORING AND WALL TILES MUST BE ALREADY INSTALLED. ENVIRONMENTAL CONDITIONS: TEMPERATURE BETWEEN 15 AND 25°C AND HUMIDITY BETWEEN 45% AND 60%. RESIDUAL HUMIDITY OF THE SUBFLOOR (CONCRETE SCREED) MUST BE ≤2 %. IN CASE OF SUBFLOORING HEATING SYSTEM INSTALLATION MUST BE CARRIED OUT AND ONLY AFTER ITS TESTING. SUBFLOORING CONDITIONS MUST BE PREVIOUSLY VERIFIED (LEVELING, CONSISTENCY, ETC.) EXCESSES OF GLUE MUST BE IMMEDIATELY REMOVED BY MEANS OF SPECIFIC CLEANING PRODUCTS. AVOID COVERING THE FLOOR WITH RUGS OR FURNITURE UNTIL FLOORING EVENING OUT. IN CASE OF ACCIDENTAL WATER OR LIQUID SPILL MOP AS SOON AS POSSIBLE.
Made in Italy
